At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

Automated Guided Vehicles, AGV:er, används i huvudsak som monteringsplattform inom tung fordonsindustri. En AGV kan användas vid montering av motorer, växellådor och chas-sin. AGV:n transporterar produkten genom en slinga i fabriken, där produkten monteras. Idag säljs AGV:n med ett löfte om femfaldig säkerhet mot brott för alla de ingående komponenter-na. AGV:n är konstruerad för att bära upp en last på maximalt 1800 kg, med säkerhetsfaktorn inkluderad.

In the automatic manual transmission system, Opticruise, the choice of gear is based on several parameters such as road incline, driving resistance and vehicle mass. Many different mass estimations are made during driving. A final vehicle mass is then used to determine the current gear. Construction vehicles are often not equipped with air suspension and can therefore not estimate the vehicle mass when standing still. If that sort of vehicle is reloaded while standing still an incorrect mass estimation will be used and as an effect of that also a wrong gear.

The demand for biogas as vehicle fuel has risen sharply and there is a great need for increased production. A possible addition of vehicle gas can be produced by upgrading landfill gas which is formed by degradation of organic waste. This thesis investigates the potential of producing vehicle fuel from landfill gas in the region of Biogas Öst.In 2008, an amount of 32 million Nm3 landfill gas was extracted in the region. This level can be maintained for another ten years if the efficiency of gas extraction is improved. The annual production will decrease with time since landfills aren?t allowed to receive more organic waste.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

This thesis presents an application that performs positioning of modules automatically based on given data for every module, and the development of it. The basis of the application is from a previous thesis code. On top of that code, more features and error handling has been added, as well as fixes for various bugs. A stress test has been performed and further development possibilities are being presented.The thesis work was carried out at Toyota Material Handling Mjölby (TMH) and was made in parallel with another thesis by Fredrik Holden who was generating data for the application. For a complete understanding of the theory and background, please also read Holden?s thesis report ?Development of method for automated positioning of 3D-representations of a modularized product?, as well as the former thesis  ?Analysis for Automated Positioning of 3D-representation of a Modularized product??..

This thesis discusses the differences between an automated and design centered layout process. The work has beenconducted at CBG Konsult AB, a service provider of multilingual solutions, translations and localization.The purpose with this work was to investigate some limitations and issues with the layout process involving the languagefamily XSL used for automated layout at CBG Konsult AB..

The purpose of this project is to get a fully functional, automatic steering system and a variable breaking system with an emergency breaking function to an off road vehicle. This off road vehicle is supposed to work as an aid in military situations. A team of two, Sebastian Attervall and Nichlas Gustafsson, got an order from Jonas Nyårds and the PreeRunners Project to construct a steering system that could manoeuvre an off road vehicle without any human involvement. To make this possible the vehicle would be guided by onboard sensors, cameras and computers. The team where also assigned to construct an automatic breaking system, there also no human would be involved.

Saab Aerosystems has a long tradition and a lot of competence in the field of flight simulation. Their ambition to broaden the market horizon has led to a discussion about also selling vehicle simulation solutions, both for military and civilian use.The aim of this thesis is to investigate the driver?s experiences of the accelerations he or she is exposed to whilst driving in rough terrain. The results may be used as a basis for future decisions and can act as a platform for the construction of an effective simulation model.To investigate the driver?s exposure of acceleration, some kind of dynamic simulation is needed.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

  Befintliga studier har påvisat att genetiska algoritmer presterar bättre om de ges en bra startpopulation. I denna rapport presenteras en lokal sökalgoritm för att skapa en population med fokus på ?vehicle routing?-problem. Algoritmen använder sig av heuristik i en blandning av simulated annealing och tabu search för att skapa individerna till populationen. Utvärderingar av algoritmen på ett praktiskt problem visar att den ger en bra start jämfört med en slumpmässig startpopulation, vilket är vanligt att använda.

This master thesis is a study on how a rategyro triad, an accelerometer triad, and a magnetometer triad can be integrated into a navigation system, estimating a vehicle?s attitude, i.e. its roll, tipp, and heading angles. When only a rategyro triad is used to estimate a vehicle?s attitude, a drift in the attitude occurs due to sensor errors.